Re: [Classic Mustang] 1967 Mustang radiator

Thanks for responding,

For the big block radiator, are there cross flow radiators? The outlet and inlet in the '67 289 are on the passenger side. Is it possible to get a big block radiator with the inlet and outlet on the same side? Most of the ones I have seen are cross flow.

Thanks in advance,

Chris

--- In classicmustang@yahoogroups.com, Ray Davison <raydav@...> wrote:
>
> Ray Davison wrote:
> > Chris Lim wrote:
> >> Hello,
> >>
> >> I have a 1967 mustang with a 289 and the stock 16 x 19.5" radiator.
> >> It's leaking, and a friend suggested I install the high capacity
> >> version for big blocks or A/C cars. Is this a direct bolt in part? I
> >> heard that the big block radiators mounts are different.
> >
> > This is the radiator in my 65.
>
> http://picasaweb.google.com/raydav94/65351W#5052651078396857586
>
> Ray
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/classicmustang/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/classicmustang/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:classicmustang-digest@yahoogroups.com
mailto:classicmustang-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
classicmustang-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/