The 68 is slightly larger and and uses the lower mounts that bolt to the
strut arm supports... the 67 BB radiator lower mounts sit on top of the strut
arm supports. The 68 style mounts require drilling a hole in the support.
Mustangsplus sells both versions
http://mustangsplus.com/xcart/home.php?cat=2229
Smith, Lee Roy wrote:
>
>
>
> I used the BB 4 row in my 67 289 fb. As I recall it was 24" wide. You
> need to use the upper & lower cradle mounts with the rubber insulators.
> When I did mine (1995), the upper cradle mount was readily available
> thru Mustang parts houses. The lower ones, however were not. They may
> be now-I have not looked. I fabricated my own lower cradle mounts.
> They bolt to the inboard side of the strut arm supports.
>
>
>
> Depending on your driving-traffic, if you have ac, etc., I would use the
> 4 row.
>
>
>
> Lee
>
--
Regards
--------------
Walt Boeninger
Walt@boeninger.net
webmaster@norcal-saac.org
webmaster@vintagemustang.org
http://shelbytransam.com
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/classicmustang/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/classicmustang/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:classicmustang-digest@yahoogroups.com
mailto:classicmustang-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
classicmustang-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment