without spoiler didn't need a prop rod.
At 12:16 PM 4/27/2009, Dan O'Reilly wrote:
>All I'm telling you is the history, since I don't have a 69 or 70 fastback
>with which to experiment. Ford did in fact put a prop rod on 69/70
>fastbacks. They wouldn't have done so had it not been necessary.
>
>At 12:09 PM 4/27/2009, Ray Davison wrote:
> >Dan O'Reilly wrote:
> > > Ray -
> > >
> > > The 69/70 fastback cars ended up with a prop rod 'cause the torsion bars
> > > weren't strong enough to hold the trunk lid open. In fact, I'm not
> > > entirely certain that early '69 cars had the prop rod (i.e., it may have
> > > been added by Ford after some customer complaints). The 71-73 cars
> have a
> > > stronger setup (although my '71 Mach's trunk lid is susceptible to
> > crashing
> > > down with only a little encouragement) and so didn't need the prop
> rod, as
> > > do the pre-69's.
> >
> >On both my 65 and 73s the torsion force is adjustable. I added spoilers
> >to both 73s. I moved the rod up a notch and it works fine. Is there
> >not such an adjustment on the 69-70? I just added a trunk rack to the
> >65 and did not have to increase the torsion force.
> >
> >Ray
>
>---
>
>Dan O'Reilly
>1971 Bright Red Mach 1
>2002 Black Deluxe Convertible
>Colorado Springs, CO
>
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>
---
Dan O'Reilly
1971 Bright Red Mach 1
2002 Black Deluxe Convertible
Colorado Springs, CO
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/classicmustang/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/classicmustang/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:classicmustang-digest@yahoogroups.com
mailto:classicmustang-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
classicmustang-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment