Thanks, I appreciate your response. Jay
--- On Sun, 1/25/09, mustngmke <mustang86svo@yahoo.com> wrote:
From: mustngmke <mustang86svo@yahoo.com>
Subject: [Classic Mustang] Re: Front fender removal on a 67
To: classicmustang@yahoogroups.com
Date: Sunday, January 25, 2009, 1:53 PM
You'll need to unbolt it from the radiator support, pull the headlight door to see the bolts. yes, take the fender off so you don't bend something. Mike --- In classicmustang@ yahoogroups. com, "jaybarbara" <jaybarbara@ ...> wrote: > > Just how do I go about removing the front fender. > I am aware there is one bolt under the rear section of the fender and > another bolt that's behind the fender that you get to by opening the > door and reaching into the back of the fender, as well as the fender > bolts on the top of the inner fender. What I don't know is what must be > removed from the front and headlight area of the fender to get it off. > I need to get to the pinch weld under the front fender to re-do the > seam sealer. > I don't want to do any more than is necessary to reach that spot. Would > it be possible to remove the fender bolts, the bolt on the bottom of > the fender and the bolt in the rear of the fender and kinda move the > fender away from the body enough to work on the pinch weld, or does the > fender have to come off completely? > Thanks > Jay > |
__._,_.___
__,_._,___
No comments:
Post a Comment