[Classic Mustang] Re: Front fender removal on a 67

You'll need to unbolt it from the radiator support, pull the
headlight door to see the bolts. yes, take the fender off so you
don't bend something.
Mike

--- In classicmustang@yahoogroups.com, "jaybarbara" <jaybarbara@...>
wrote:
>
> Just how do I go about removing the front fender.
> I am aware there is one bolt under the rear section of the fender
and
> another bolt that's behind the fender that you get to by opening
the
> door and reaching into the back of the fender, as well as the
fender
> bolts on the top of the inner fender. What I don't know is what
must be
> removed from the front and headlight area of the fender to get it
off.
> I need to get to the pinch weld under the front fender to re-do the
> seam sealer.
> I don't want to do any more than is necessary to reach that spot.
Would
> it be possible to remove the fender bolts, the bolt on the bottom
of
> the fender and the bolt in the rear of the fender and kinda move
the
> fender away from the body enough to work on the pinch weld, or does
the
> fender have to come off completely?
> Thanks
> Jay
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/classicmustang/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/classicmustang/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:classicmustang-digest@yahoogroups.com
mailto:classicmustang-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
classicmustang-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/