switch and the canceling pins on a Grant steering wheel...
I was cleaning up my shop yesterday and saw a small piece of paper on
the floor. It was a note from Grant Steering wheels stating that on
some cars, the spring steel pins that cancel the turn signals have to
be bent to clear the canceling arms when the signal is off. I wish I
had seen that a couple of weeks ago! Now I have to take the wheel off,
put the pins back in and try to bend them to the proper clearance.
This should be fun. NOT!
-Steve-
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/classicmustang/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/classicmustang/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:classicmustang-digest@yahoogroups.com
mailto:classicmustang-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
classicmustang-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment