[Classic Mustang] Re: I need help.

If I recall correctly, anyone correct me if I'm wrong, there are
notches on the front chrome piece of the ignition switch. So after
you remove and label all the wires from the backside of the switch (to
know what wire went where when you're ready to hook them back up) you
then turn the front of the chrome bezel counter clockwise to remove
it. I don't know if you use a special tool for that or VERY carefully
tap it with a screwdriver so as not to scratch the paint on the dash
or dent the chrome. You just want to get it started and might need
some WD40 from the back side to get it going, 42 years later :)

Phil

--- In classicmustang@yahoogroups.com, lotta love <lvrebel29@...>
wrote:
>
> How do I remove the ingition from the dash board if Ive lost the key
(65 mustang conv w 289)? can anyone help
>  
>  
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/classicmustang/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/classicmustang/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:classicmustang-digest@yahoogroups.com
mailto:classicmustang-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
classicmustang-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/