[Classic Mustang] Re: Parking brake handle

The punch and hammer will work. Be sure and back up the side you are
driving toward, use something like a second hammer. It does sort of
require three hands...hold the punch, hold the hammer and the back up.
If you slip and break the old handle, it can just make the job easier.
When installing the new handle, I suggest pressing the pin in with
a "C" clamp or channel lock type pliers. Be sure and use something
between the tool and the plastic handle to protect it from tool marks.

Good luck with your handle replacement,
John

--- In classicmustang@yahoogroups.com, "Joe/Pat Oliver"
<JoeOliverCA@...> wrote:
>
> My 68 mustang coupe has the parking brake handle pinned on. Any
suggestions of how to remove the pin so that I can replace the broken
handle.
> Thanks, Joe
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/classicmustang/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/classicmustang/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:classicmustang-digest@yahoogroups.com
mailto:classicmustang-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
classicmustang-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/