[Classic Mustang] Re: i6 rear end help

Depending on which yoke they put on it with the heavy duty tranny,
you might be able to use the v8 drive line, or have yours modified.
Mike

--- In classicmustang@yahoogroups.com, "jfruge4" <joshuafruge@...>
wrote:
>
> Greetings,
>
> I have a 67 mustang with the 200 i6 and 3 speed manual
transmission.
> I am converting the front to disc brakes, and moving from 4 lug to
5
> lug. I also want to move the rear to 5 lug. So I am swapping out
my
> 7.25 for an 8 inch. my question is this...what will I have to do
> about my drive shaft? Will my existing work, or what
modifications
> will I have to make? Any tips or advice is welcome. I have found
> lots of info doing this for a i6 to v8 swap, but I plan to keep
the
> i6 and 3 speed...and I haven't found much info on doing that.
>
>
> Thanks
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/classicmustang/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/classicmustang/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:classicmustang-digest@yahoogroups.com
mailto:classicmustang-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
classicmustang-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/