[Classic Mustang] i6 rear end help

Greetings,

I have a 67 mustang with the 200 i6 and 3 speed manual transmission.
I am converting the front to disc brakes, and moving from 4 lug to 5
lug. I also want to move the rear to 5 lug. So I am swapping out my
7.25 for an 8 inch. my question is this...what will I have to do
about my drive shaft? Will my existing work, or what modifications
will I have to make? Any tips or advice is welcome. I have found
lots of info doing this for a i6 to v8 swap, but I plan to keep the
i6 and 3 speed...and I haven't found much info on doing that.

Thanks

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/classicmustang/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/classicmustang/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:classicmustang-digest@yahoogroups.com
mailto:classicmustang-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
classicmustang-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/